FE Lens Diffraction Comparison
Compare telephoto reach, teleconverters and Super 35 crops, and see how aperture relates to a chosen diffraction criterion.
Published
Reach · aperture · diffraction
Compare your telephoto options
Reading the comparison
Choose lenses, teleconverter configurations, a camera estimate and a wavelength. Original configurations stay visible whenever their lens is selected. Zoom lenses are evaluated at the listed long-end focal length. The three 100–400 mm entries represent different lenses, with the listed f-numbers used for their calculations at 400 mm.
The horizontal axis shows full-frame-equivalent focal length, which describes framing. A 600 mm lens with a 1.4× teleconverter has an optical focal length of 840 mm. A further 1.5× crop gives framing equivalent to 1260 mm on full frame; it does not turn the lens into an optical 1260 mm lens.
Switch the vertical axis between physical and equivalent aperture. With that same 600 mm f/4 lens, a 1.4× teleconverter gives physical f/5.6; with a 1.5× crop, the equivalent f-number becomes f/8.4. Exposure and the Airy-disc calculation still use physical f/5.6.
Circles indicate full-frame configurations; squares indicate S35 crops. Hollow markers exceed the selected physical Airy criterion. In equivalent-aperture view, the S35 criterion line is multiplied by 1.5, so crop points are compared on the same basis. The graph uses full-stop spacing vertically, with smaller f-numbers at the bottom. Hover, click or keyboard-focus a point to show its original lens, teleconverter/crop configuration and calculated values in the panel below the graph. Overlapping points list every matching configuration. The details stay visible until you inspect another point or change the comparison. Expand Calculated results for the complete table. Labels may overlap when many configurations are selected; clear lenses to inspect a smaller group.
The optional TC filter retains the first teleconverter tier above the criterion and hides stronger tiers. If the original aperture already exceeds the criterion, it hides every TC tier. Cropped configurations follow the same TC rule because cropping does not change the Airy-disc diameter at the sensor. This filter is a viewing aid, not a recommendation to use or avoid a particular teleconverter.
Sharing a comparison
Choose your settings, then click Copy link to these settings above the graph. Opening that link restores the camera, Airy-disc criterion, wavelength, selected lenses, teleconverters, crop modes, aperture display, point labels and TC filter. The link is also shown for manual copying if clipboard access is unavailable. Copied links use the public website address, so they can be shared with other people once the changes are published.
Copied links use one short settings code to reduce problems with forum link formatting. Paste the complete link into your post; a forum may shorten the visible text without changing the destination. The browser address updates as you change settings, so you can also bookmark your current comparison. Reset returns to the original comparison and updates the address accordingly.
Assumptions and camera presets
All results are estimates, not lens measurements. The camera selector supplies approximate reference f-numbers for an Airy-disc diameter of two pixels at 550 nm: f/8.75, f/7.62, f/6.18, f/5.56 and f/5.35, respectively. They are calculation presets, not manufacturer-specified diffraction limits or independently verified pixel pitches. The Sony A7R VI 67 MP preset uses the f/5.35 reference. For a two-pixel reference, the implied pixel pitch is 2.44 × 0.55 × reference f-number / 2 in micrometres.
S35 is modelled as a fixed 1.5× crop of the same sensor, retaining the same pixel pitch. It is not a simulation of a separate APS-C camera or a specific video readout. Real crop factors and resampling can differ. Teleconverters multiply optical focal length and physical f-number by 1.4 or 2; no extra transmission loss, aberrations or autofocus changes are modelled. Selecting a combination does not establish lens/teleconverter compatibility.
The equivalent f-number describes output equivalence at matched framing and output size; it is not the exposure f-number. Diffraction grows gradually. A two-, two-and-a-half- or three-pixel Airy diameter is a chosen reference, not a boundary between sharp and unusable images. Lens aberrations, focus, motion, demosaicing, processing and final viewing size all affect the result.
How diffraction is calculated
For an ideal circular aperture, the Airy-disc diameter between the first minima is approximately:
Airy diameter = 2.44 × wavelength × physical f-number
Use matching units for wavelength and diameter. This relation and its wavelength dependence are described by Edmund Optics. Here the calculation scales each two-pixel, 550 nm camera reference as follows:
Criterion f-number = reference f-number × (chosen pixel diameter / 2) × (550 / wavelength in nm)
For example, the f/8.75 preset becomes approximately f/6.88 at 700 nm with the same two-pixel criterion. This is the aperture at which the ideal Airy diameter reaches the selected pixel count. It does not predict measured lens resolution or how much extra subject detail a teleconverter will resolve.
For a geometric comparison of framing alone, use the Field of View Calculator.